SUBSOILER
– SHARE ECONOMY WITH TWO SIDED REVERSIBLE POINTS.
– DEPTH ADJUSTMENT OPTION.
– LEG BULLETS STANDART WITH 10 CM DIAMETER.
ALPLER RAKE WITH ROTORS IS AN IDEAL MACHINE THAT FACILITATES THE PICKING AND THE BALING WITH THE GRASS PICKING TRAILER OR BALING MACHINE BY FORMING THE HARVESTED FEED-PLANTS IN BARRELS ARRANGED AT REGULAR INTERVALS. IT HAS A HIGH MANOEUVRABILITY AND HAS LITTLE POWER REQUIREMENTS AND WIDE RANGE PERFORMANCES. IT PERFORMS A HIGH-QUALITY PICKING BY LEAVING CLEAN STUBBLE AS IT DOESN’T LEAVE ANY STONE OR SIMILAR OBJECTS IN THE GRASS THAT HAS BEEN PICKED.
ROTARY SLASHERS
USE OF MACHINE
– USED FOR GENERAL GRASS-CUTTING AND SLASHING WORK
STANDARD FEATURES:
– IDEAL FOR MEDIUM TO SMALLER TRACTORS
– ADJUSTABLE CUTTING HEIGHT
– ALPLER ROTARY TILLER IS A SECONDARY TILLAGE TOOL USED IN PREPARING SEED-BEDS, STUBBLE-PLOUGHING IN ESPECIALLY FARMS, VINEYARDS AND GARDENS. IT IS ALSO A MULTI-PURPOSED AND LONG LASTING ENVIRONMENT-FRIENDLY MACHINE THAT HELPS WITH THE INCREASE OF THE HUMUS CONTENT OF THE SOIL BY INCORPORATING THE PLANT RESIDUES AND ORGANIC FERTILIZER INTO THE SOIL AND IT DOES NOT MAKE IT A NECESSITY TO FIGHT WITH THE CHEMICAL WEEDS.
– THE FACT THAT THE MOTION COMING FROM THE POWER-TAKE-OFF SHAFT IS TRANSFERRED TO THE BLADES THROUGH THE GEAR SYSTEM MAKES SAVINGS ON POWER AND FUEL IN PROPORTION TO THE CHAIN SYSTEM. THE MILLING CUTTER BLADES SHREDS, MIXES AND CRUMBLES THE SOIL BY OPERATING VERTICALLY ON THE SURFACE OF THE SOIL. IT PROVIDES THE WATER-AIR BALANCE OF THE SOIL BY MAKING IT LOOSE.
BIG BALER MACHINES
ALPLER SQUARE BALER IS FIRST DOMESTIC PRISMATIC BIG BALER MACHINE WHICH IS PRODUCED IN TURKEY FROM TURKISH ENGINEERS.
A-BM 870, 80×70 CM BALE WIDTH, 190 CM PICK-UP CAPACITY, DURABLE AND ROBUST FRAMEWORK, DESIGNED FOR USE IN LARGE
AREAS. IT IS PRODUCED WITH DOUBLE-KNOTTED KNOTTER GROUP WITH 4 TWINES AND IS PRODUCED WITH CHOPPER AND WITHOUT
CHOPPER.
A-BM 1270, 120×70 CM BALE WIDTH, 230 CM PICK-UP CAPACITY, DURABLE AND ROBUST FRAMEWORK, DESIGNED FOR USE IN
LARGE AREAS. IT IS PRODUCED WITH DOUBLE-KNOTTED KNOTTER GROUP WITH 6 TWINES AND IS PRODUCED WITH CHOPPER AND WITHOUT
CHOPPER.
A-BM 8002E DUAL 2 MODEL IS DESIGNED WITH AUTOMATIC CHOPPER SYSTEM, WHICH IS CONTROLLED FROM THE TRACTOR WTIH HYDRAULIC PISTONS, OPERATOR CAN BALE GRASS AND STRAW WITHOUT ANY DISASSEMBLY OPERATION.
DIFFERENCES BETWEEN DUAL-I MODE IS FREQUENT BLADES AND ROTOR SYSTEM. DUAL-II MAKES THINNER STRAWS THANKS TO ITS FREQUENT BLADES AND ROTOR. THANKS TO ITS DUAL-SPEED GEARBOX, IT OFFERS THE OPTION OF OPERATING AT DIFFERENT SPEEDS FOR GRASS AND HAY BALES.
HORIZONTAL MIXER FEEDER
ALPLER HORIZONTAL MIXER-FEEDERS; ARE DESIGNED TO BRING VARIOUS ANIMAL FEED INTO A HOMOGENOUS MIXTURE AND TO DISTRIBUTE THIS MIXTURE TO THE ANIMALS WITH ITS ROBUST, STRONG AND RELIABLE STRUCTURE AND EASY USE. ALL OPTIONS OF HORIZONTAL FEED MIXERS OF APPROPRIATE CAPACITY FOR ALL KINDS OF SMALL, MEDIUM AND LARGE SCALED ENTERPRISES ARE AVAILABLE WITH QUALITY AND PRIVILEGE OF ALPLER.
HORIZONTAL FEED MIXERS ARE MOVED BY A TRACTOR VIA AN ARTICULATED SHAFT. THEY ARE CONNECTED TO THE TRACTOR AND CARRIED WITH A DRAWBAR. THE MOVEMENT IS TRANSMITTED TO THE AUGERS BY GEARS LOCATED AT THE FRONT SIDE OF THE MACHINE AS TO ROTATE REVERSELY. WHEN THE MACHINE IS IN STABLE STATUS, VARIOUS MATERIALS LOADED IN THE RESERVOIR BY A DIPPER LOCATED AT THE BACK ARE MIXED WITH AUGERS.
IN ADDITION, THANKS TO NUMEROUS KNIVES LOCATED ON THE AUGERS GRINDING PROCESS IS PERFORMED. MIXED MATERIALS ARE DISCHARGED IN THE ANIMAL FEEDERS AT THE DESIRED QUANTITY FROM THE SIDE OF THE MACHINE BY MEANS OF A PALLET TRANSMITTER MOVED BY A HYDRAULIC MOTOR.
A SIMPLE MACHINE, WITH ALL THE FEATURES AND TECHNOLOGY NEEDED IN TODAY’S CONDITIONS, AT A FRACTION OF THE PRICE OF MANY COMPETITORS. WITHOUT COMPRISING SAFETY OR QUALITY. THIS IS NOT JUST ABOUT SAVING MONEY, BUT APPLYING FERTILIZERS AS EVENLY AND PRECISELY.
– ADJUSTABLE SPREAD WIDTH
– CHOICE OF DISC AND BLADE SETS.
FLAIL MOWER
FLAIL MOWER IS AN IMPORTANT EQUIPMENT THAT IS DRIVEN BY THE TRACTOR TAIL SPINDLE AND CONNECTED TO IT WITH THREE POINT HITCH SYSTEM. IT WORKS VERTICALLY ON THE SURFACE OF THE SOIL AND IT CUTS THE STALKS OF THE PLANTS SUCH AS WHEAT, SUNFLOWER, COTTON, UNSHELLED RICE, TOBACCO AND THICKET AND THE BRANCHES OF THE PRUNED FRUIT TREES AND VINE SHOTS PERFORMS THE RECYCLING OF THEM AS ORGANIC FERTILIZER.
IT REAPS ALL KINDS OF FEED PLANTS, GRASS, MEADOW GRASS, HEATH AND WILD PLANTS BORDERING THE ROADS WITH BLADES ROTATING AT A HIGH ANNULUS VELOCITY AND EXISTING IN BOTH OF THE 2 DRUMS ROTATING REVERSELY TO EACH OTHER AND LEAVES THEM BEHIND IN THE FORM OF BARREL.
WITH THE ADVANTAGE OF ADJUSTABLE CUTTING HEIGHT AND THE HIGH QUALITY OF THE CUTTING HEIGHT, THE NUTRIENT VALUES OF THE PLANT ARE PRESERVED AND DRYING IS MADE POSSIBLE IN A SHORT TIME.
WITH ITS LITTLE POWER REQUIREMENT, IT OPERATES IN A HIGH-QUALITY MANNER WITHOUT TIRING THE TRACTOR.
THE BELTS ARE TIGHTENED BY MEANS OF A SPRING AND THUS THE SAFETY IS ENSURED ON THE PULLEY MECHANISM.
ITS ADAPTATION TO THE UNEVENNESS OF THE GROUND IS HIGHLY SUCCESSFUL.
ALPLER TEDDER SPREADS MOWN FODDER CROPS AND ENSURES RAPID DRYING WITHOUT HAVING FODDER CROPS TO LOSE THEIR NUTRITIONAL VALUE; THUS ALLOWS MULTIPLE HARVESTS WITHIN THE YEAR SINCE FODDER CROPS ARE REMOVED IN A SHORT PERIOD OF TIME.
ROLLER
– CAPABLE OF TACKLING TOUGH SCRAPING PROJECTS.
– HEAT TREATED REVERSIBLE AND REPLACEABLE CUTTING EDGE.
– SINGLE OR DUAL DEPTH CONTROL TIRES FOR PRECISION GRADING (OPTIONAL).
– STANDARD PARKING STAND FOR EASY MOUNTING AND SAFETY.
– EASY OFFSET, ANGLE AND BLADE ROTATION ADJUSTMENT.
CULTIVATOR FERTILIZER
– USUALLY IT IS MORE APPROPRIATE TO USE WHERE THERE IS PLENTY OF STRAW WASTE ON THE FIELD.
– FOR DISC TYPE MACHINES, FERTILIZER COULTER ARE ALSO PRODUCED WITH DOUBLE-DISCS.
– DEPTH SETTINGS CAN BE ADJUSTED WITH THE HELP OF THE WHEELS NEXT TO THE PLANTER DISC, WHILE PRESSURE IS APPLIED WITH V-SHAPED PRESSURE WHEELS AT THE REAR OF THE UNIT. ALSO OPTIONALLY A SEED PRESSURE WHEEL IS ATTACHED TO REAR SIDE OF THE PLANTER DISCS FOR SMALL AND DELICATE SEEDS.
REVERSIBLE PLOUGH
– TIME SAVINGS AND REDUCED FUEL CONSUMPTION.
– THREE POSITIONS MECHANICALLY (STANDARD) OR INFINITELY VARIABLE HYDRAULIC WORKING WIDTH ADJUSTMENT FROM TRACTOR SEAT (OPTIONAL).
– EASE AND SPEED OF SET-UP INTO THE WORK/TRANSPORT POSITION.
– FOR OPTIMUM USE OF ENGINE POWER, TRACTOR INTER-TIRE DISTANCE ADJUSTMENT (OPTIONAL).
– OPTIONAL BOLT SAFETY SYSTEM.
– VARIOUS ACCESSORIES AND BODY TYPES FOR DIFFERENT NEEDS.
– FLANGED FRAME TO ADD AN EXTENSION, IF REQUIRED.
– EASE AND SIMPLE ADJUSTMENTS FOR THE BEST TRACTOR ADAPTATIONS.
– BOX SECTION TOP QUALITY STEEL FRAME CONSTRUCTION.
– HIGH PERFORMANCE ALLOYS, DURABLE, GEARS AND DISCS.
– HASSLE-FREE AND LONG-LASTING STEEL BALL BEARINGS.
– TWO DIFFERENT ROLLER OPTIONS.
The TMS JMAC Depot is Located in FINNAN, BALLYRAGGET, CO. KILKENNY has 95% of quick moving first pick parts for all JMAC products currently sold in Ireland.
We offer a standard 12 month warranty with an optional Three year warranty or 3000 engine hours on our entire range of products.
